Peugeot 308 Key Fob Replacement
Peugeot's 308 is a bit old however it's still appealing. It might not be the most luxurious car in its class but the Ford Focus or Volkswagen Golf will shield you from surface imperfections - but it's a relaxed and comfortable drive.
Here at Coded Car Keys we are often asked to replace peugeot 308 key fobs. Whether the problem is ongoing or continuous, the following tips should aid.
Water Damage
When you accidentally leave your key fob in a puddle or get it wet during kayaking, swimming, canoeing, rafting or canyoning, it's most likely to suffer water damage. The best method to prevent this from happening is to keep it in a dry, dry bag when you're outdoors or performing things where the fob might be exposed to large amounts of water.
You'll also want to ensure that the fob is completely dry before opening it up and reusing it. If you notice any smells emanating from the fob (such as industrial liquid or windshield washer fluid) It's another sign that it has been submerged.
A wet circuit could cause the battery's power to be depleted or even explode. If you're able fish your key fob 308 out of the water in which it was stuck in then flip the button side down and shake out as much water as you can before opening the case. Once you have opened it, take out the battery and clean the circuit board with an alcohol-soaked cotton swab. 90 percent isopropyl alcohol.
Other causes why your Peugeot 308 remote entry keyless system may not function include a dead coin-cell battery, receiver module problems signal interference, or a damaged chip. If none of the above are the problem you can restart the system by disconnecting 12 Volt battery from the car for 15 minutes.
Dead Coin Battery
Peugeot cars are equipped with a remote-start system which allows the driver to start the car from afar and then warm up or cool down the vehicle prior to entering. This feature is extremely helpful particularly during the winter's cold and chilly months. However, it is possible that the remote start system stops functioning due to a variety of reasons, such as the battery in the coin is dead.
A coin-shaped battery in the key fob has a lifespan of two to four years, depending on how often it's used and where it is purchased. The date of use is typically printed on the packaging or in the manual.
If the key fob is not functioning after exposure to water that is clean, you should take the battery off, clean the electronic chip using a paper towel and isopropyl alcohol, then dry it completely before replacing it. If the key fob has been exposed to soapy or salty water, it may have fried the chip. It is recommended to replace it.
If you're unsure whether the battery is defective it is possible to check the voltage using a multimeter that is connected to both the terminals plus and minus. If the voltage is less than 12-13 volts, you should replace the battery. You can also try to reset the onboard computer by disconnecting the battery at 12 volts for a few minutes and then reconnecting it in reverse order (positive cable first and then negative). The engine should be able to start after this.
Faulty Receiver Module
If you're not receiving the "Key Detected" message on your dashboard, it's possible the receiver module has developed a fault. It's the part which sends out a signal when your key fob activates. It also functions as an alarm that stops the car from starting if it doesn't have the correct key.
It could be due to many reasons, such as water damage or simply the aging process. If the electronic chip inside your Peugeot 308 keyfob has been damaged due to dirty tap water it could be due to the fact that the keyfob was exposed to it. In this case it is necessary to take the device apart and thoroughly clean it with isopropyl alcohol or electronic cleaner. Once the battery has dried, you can try again.
If the issue continues to persist the issue persists, it's a good idea to see an area Peugeot specialist or locksmith. They will be able to use a diagnostic tool to identify the issue and repair it for you.
The loss of your Peugeot keys to your car is an incredibly stressful experience. A reputable auto locksmith can resolve the issue within minutes. They can cut a brand new key and program it to your vehicle, ensuring that you can get back off the road in the shortest amount of time. replacement key for peugeot partner van to locate a locksmith in your area.
Faulty Electronic Chip
The electronic chip inside your Peugeot 308 key fob is a very crucial component of the remote control system. If it becomes damaged, your car might not start or receive a message that reads "anti-theft active". If this occurs, the only way to fix the problem is to purchase a new key. Luckily, auto locksmiths who are professionals can provide the service in the shortest amount of time.
The chip in your Peugeot 308 key fob can fail due to water damage, sweat dirt, or other reasons. If your Peugeot 308 key fob is exposed to soapy water, it is recommended to take it to the cleaners immediately. You can clean the electronic component with paper towels soaked with isopropyl Alcohol. The battery must then be allowed to dry completely.
Sometimes, a key fob can cease to function due to radio interference. This could be due to other devices operate on the same frequencies as your Peugeot keyfob. This could be due to problems with the environment or objects within the vicinity of the vehicle. It is recommended to see a Peugeot dealer in the event of this issue.
The Peugeot 207/308 Key Fob is very delicate and requires special care. It should not be dropped or throw it around. If you lose something, try to locate it as quickly as you can. You can reset the onboard computer by disconnection of the battery for a couple of minutes. Disconnect the negative cable before the positive.
